CRANE - STABILIZER EXTENSION LEG PRESSURE SWITCH

TM 5-5420-279-23

CRANE - STABILIZER EXTENSION LEG PRESSURE SWITCH

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

None

Equipment Conditions

Extension Leg in the down position but do not deploy to the ground

Vehicle switched off and battery shutoff switch in the off position

WARNING

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC

FLUID. SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO

BE USED TO CONTAIN SPILLAGE.

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. THE SYSTEM MUST BE

DE-PRESSURIZED BEFORE CARRYING OUT ANY WORK ON THE STABILIZER

EXTENSION LEG PRESSURE SWITCH.

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. DO NOT REMOVE THE

STABILIZER EXTENSION LEG PRESSURE SWITCH WHEN THE STABILIZER LEG

IS DEPLOYED.

NOTE

Each stabilizer leg has a pressure switch. This procedure is applicable to either stabilizer

leg pressure switch.

6-215