|
|
TM 5-5420-279-23
a.
Remove
(1)
Locate and remove the electrical cable (3) connected to the proximity switch (1).
(2)
Remove the proximity switch lock nut (5).
(3)
Remove the proximity switch (1).
(4)
Check the electric cable for damage.
(5)
Replace components as required.
b.
Install
(1)
Fit the proximity switch (1) to the bracket (2).
(2)
Adjust the proximity switch (1) using the lock nuts (4 and 5).so that the gap (6) between the
end of the proximity switch (1) and the extension control lever (7) is no more than 9/16"
(15mm).
(3)
Tighten the lock nut (5).
(4)
Fit the electrical cable to (3) the proximity switch (1).
c.
Follow on tasks
(1)
Switch the battery shutoff switch to the on position.
(2)
Test the operation of the proximity switch in accordance with the operator's manual
TM 5-5420-279-10.
6-214
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |