LAUNCH FRAME - LAUNCH BEAM DRIVE

TM 5-5420-279-23

LAUNCH FRAME - LAUNCH BEAM DRIVE

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Thread locking compound, loctite 243

Personnel Required

Two

Equipment Conditions

A-Frame Unfolded

Launch Frame Rear Resting on Dunnage

WARNING

CRUSH INJURY. TO AVOID INJURY TO PERSONNEL WHEN WORKING ON THE

LAUNCH BEAN DRIVE ALWAYS ENSURE THAT THE WEIGHT OF THE LAUNCH

BEAM DRIVE IS SUPPORTED.

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. THE SYSTEM MUST BE

DE-PRESSURIZED BEFORE CARRYING OUT ANY WORK ON THE ARTICULATOR

CYLINDERS.

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC

FLUID. SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO

BE USED TO CONTAIN SPILLAGE.

6-32 Change 1