A-FRAME - STABILIZER LEG ASSEMBLY REMOVE

TM 5-5420-279-23

A-FRAME - STABILIZER LEG ASSEMBLY REMOVE

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

None

Personnel Required

Four

Equipment Conditions

Launch frame removed from A-Frame

A-Frame removed from the Slide Frame and laid on ground, suitably supported

with hydraulic pipes uppermost.

WARNING

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. THE SYSTEM MUST BE

DE-PRESSURIZED BEFORE CARRYING OUT ANY WORK ON THE A-FRAME

STABILIZER LEG ASSEMBLY.

CRUSH INJURY. THE A-FRAME STABILIZER LEG IS HEAVY.

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC

FLUID. SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO

BE USED TO CONTAIN SPILLAGE.

Change 1 6-25