GENERAL - SECTIONALIZATION OF THE LAUNCHER

TM 5-5420-279-23

5 - 159 GENERAL - SECTIONALIZATION OF THE LAUNCHER

This task covers:

Introduction

DSB far bank support removal

DSB far bank support re-fitting

Tail lift removal

Tail lift re-fitting

Launch equipment removal

Launch equipment re-fitting

Crane removal and replacement

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

None

Equipment Conditions

None

Introduction

(1)

To reduce the overall weight and dimensional envelope of the launcher, it has been

designed for easy and rapid sectionalization. The crane, Tail lift and slide frame based

launcher and A-Frame stabilizer feet are all removable. This is achieved through the use

of quick disconnect hydraulic hoses, plug and socket electrical connections and wide use

of simple pinned mechanical attachments. Lifting and tie-down points are provided on the

crane and launcher to aid lifting.

(2)

Sectionalization of the launcher can be achieved within 1 hour and should be performed as

outlined in the section below.

DSB Far Bank Support Removal

To remove the far bank support follow the procedure below:

NOTE

The Numbers on the diagrams refer to the Paragraph Numbers of the Text.

(1)

Release A-Frame shoot bolts and remove left and right hand mudguards