Section VI. RADIAC Support

TB 750-25

(21) Are storage conditions (environmental, accessibility, etc.) adequate for

instruments in this status?

(22) Are instruments designated for storage removed from the work area?

(23) Is the storage area segregated from the work area?

(24) Are items being placed in CBU status in an operational condition, and the

supporting TSA notified of the status change?

(25) Are instruments held in storage with DA Label 80 overprinted CBU

identified as such in the IMRF?

(26) Are instruments held in storage removed from the cyclic calibration

projected items list?

(27) When TMDE is removed from storage (CBU), is it submitted for calibration

prior to being used?

(28) When instruments are turned in as excess, are controls established by the

unit's equipment manager for proper coding of TMDE?

Section VI. RADIAC Support

3-11. General. Support for RADIAC meters, including dosimeters, is provided in TB 9-

6665-285-15, Radiation, Indication, and Computation (RADIAC) Meters.

Section VII. CROSS-CHECKS, INTERCOMPARISONS, AND VISUAL INSPECTIONS

3-12. General. Guidance for performing cross-checks, intercomparisons, and visual

inspections is outlined in TB 9-4931-537-35, Calibration Procedure for Cross-Checks,

Intercomparisons, and Visual Inspections.

Section VIII. FREQUENCY AND TIME MEASUREMENTS

3-13. General. Support for frequency and time measurements is provided in TB 9-

4931-539-35, Frequency and Time Measurements.

Section IX. SMALL ARMS AND AMMUNITION GAGES

3-14. General. The owners/users contact their local calibration activity for instructions

on where to send their gages for inspection and calibration.

a. For any small arms and ammunition gages not identified in the owner/user

IMRF, a DA Form 3758-R will be completed and submitted by the owner/user to the

supporting organization in accordance with appendix B.

3-8