Readings must be within limits given in table 4-59.
The letter L shows a loose fit. I f readings are not
within given limits, throw away part and get a new
M e a s u r e inside diameter of two bypass valve bores (1).
Measure out side diameter of two valve plungers (2).
M e a s u r e fit of each of two valve plungers (2) in its plunger bore (1).
GO TO FRAME 5
Table 4-59. Oil Cooler and Filter Housing Assembly Wear Limits
Size and Fit
of New Parts
Item/Point of Measurement
B y p a s s valve bores inside diameter
0.8030 to 0.8040
Valve plungers out side diameter
0.8000 to 0.8010
1 and 2
F i t of plunger in housing bore