HOUSING AND STATOR ASSEMBLY. - TM-9-2920-225-340076

TM 9-2920-225-34

2-10. HOUSING AND STATOR ASSEMBLY.

TOOLS : No special tools required

SUPPLIES :

Electrical tape, MIL-T-50886

Housing seal

Housing lip seal

Tags

PERSONNEL:

One

EQUIPMENT CONDITION :

Generator removed from vehicle, pulley removed from

generator.

(1) Clean outside of generator before disassembly. Refer to para 1-3.

(2) Remove drive end bell. Refer to para 2-8.

(3) Remove fan and hub assembly. Refer to para 2-7.

(4) Remove end housing. Refer to para 2-9.

Disassembly.

NOTE

If working on early model generator, do frame 1.

If working on late model generator, go to frame 2.

Tag all leads (1) so that they can be put back the same way.

Unsolder three splice connections (2).

3. Take out two screws (3) and take stator (4) away from housing (5).

GO TO FRAME 3

TA103561

2-60