Cleaning - TM-9-2920-225-340067

TM 9-2920-225-34

d. Cleaning

There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 1-3.

e. Inspection and Repair.

(1) Inspection.

FRAME 1

NOTE

If bearing is not within limits given in table 2-3, get

a new bearing. If rotor is not within limits given in

table 2-3, generator is nonrepairable.

Measure bearing outside diameter ( 1).

Measure bearing inside diameter (2).

Measure rotor shaft outside diameter (3) at far end.

Measure bearing seat outside diameter (4) at far end of rotor shaft.

Measure rotor shaft outside diameter (5) at drive end.

Measure bearing seat outside diameter (6) at drive end of rotor shaft.

Measure slipring outside diameters ( 7).

GO TO FRAME 2

TA103552

2-51