|
|
TM 9-2815-210-34-2-2
f. Final Run-In.
FRAME 1
S t a r t and warm up engine. Refer to para 6-6b.
1.
M o v e throttle (1) until SPEED gage (2) shows 2800 rpm.
2.
Open engine load valve (3) until POWER gage (4) shows 160 to 205 HP.
3.
Set throttle (1) and load valve (3) to get 160 to 205 hp and 2800 rpm.
4.
I f hp reading is too high, open unload valve (5).
Run engine at 160 to 200 hp and 2800 rpm for 1/2 hour.
5.
W r i t e down fuel pressure shown on FUEL PRESS gage (6).
6.
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |