|
|
TM 9-2815-210-34-2-2
FRAME
15
T u r n crankshaft about 45 to the left as viewed from front of engine. Then
1.
t u r n crankshaft back to the right until proper timing mark on crankshaft
v i b r a t i o n damper and pulley lines up with timing pointer on timing gear cover.
Refer to frame 1.
C h e c k fuel injection pump timing again. Refer to frames 13 and 14.
2.
P u t automatic timing device cover gasket (1) on automatic timing device win-
3.
d o w (2) as shown. Put automatic timing device cover (3) on automatic timing
d e v i c e window as shown. S c r e w in and tighten four screws and lockwashers
(4).
P u t timing window gasket (5) on side of fuel pump (6) as shown.
4.
I f working on any engine except LDS-465-2, put timing window cover (7) on
5.
s i d e of fuel pump (6) as shown. P u t in two fillister head screws and lock-
washers (8).
I f working on engine LDS-465-2, put fuel shutoff solenoid (9) on side of fuel
6.
-
p u m p ( 6 ) . P u t in two sockethead s c r e w s a n d l o c k w a s h e r s ( 1 0 ) .
END OF TASK
5-186
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |