FRAME 11 - TM-9-2815-210-34-2-20812

9-2815-210-34-2-2

FRAME 11

NOTE

Do not turn fuel pump drive gear hub (1) when

p u t t i n g on fuel pump drive gear (2) and fuel pump

d r i v e gear retaining plate (3).

Hold fuel p u m p drive gear (2), on drive gear hub (1). Screw holes (4) in

drive gear hub should-be at left end of elongated holes in fuel pump - d - r i v e

g e a r (2) as shown. Fuel pump drive gear must mate with camshaft gear (5)

as shown.

H o l d fuel pump drive gear retaining plate (3) against fuel pump drive gear (2),

Holes in retaining plate must line up with screw holes (4) in fuel pump drive

gear hub (1).

P u t in but do not tighten three screws and lockwashers (6) to hold retaining

p l a t e (3) and fuel pump drive gear (2) in place.

GO TO FRAME 12

5-182