|
|
TM 9-2815-210-34-2-2
FRAME 11
1.
Coat both sides of gasket (1) with sealant. Put gasket in place on cylinder
block (2).
2.
P u t engine front plate (3) in place. Put in and tighten six screws with lock-
washers (4).
C o a t front main bearing cap (5) and lower main bearing half (6) with oil. Put
3.
main bearing half into main bearing cap.
P u t front main bearing cap (5) in place in cylinder block (2). Put in two
4.
c a p screws with washers (7). T i g h t e n two capscrews to 80 to 90 pound-feet.
T i g h t e n two cap screws (7) to 120 to 125 pound-feet.
5.
END OF TASK
5-19
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |