|
|
TM 9-2815-210-34-2-2
I n s p e c t i o n and Repair.
b.
NOTE
This task is shown for one tube and one tube nut.
It can be used for all flame heater tubes and tube
nuts.
FRAME 1
1.
C h e c k that plastic tubing (1) is not cracked, kinked or brittle.
2.
C h e c k that plastic tubing (1) has not cracked around tube nuts (2).
T h r o w away plastic tubing (1) if it is cracked or damaged and get a new one.
3.
T h r o w away plastic tubing (1) if tube nuts (2) are stripped or damaged and
4.
get a new one.
C h e c k that 1/4-inch plastic tubing (1) has not shrunk at tube nut ferrules
5.
( 2 ) . Throw away 1/4-inch plastic tubing if No. 28 drill shank (3) cannot be
p u t in tube opening.
C h e c k that 1/8-inch plastic tubing (1) has not shrunk at tube nut ferrule (2).
6.
T h r o w away 1/8-inch plastic tubing if 1/32-inch drill shank (3) cannot be put
in tubing opening.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |