|
|
TM 9-2815-210-34-2-2
4-54. HYDRAULIC PUMP OIL HOSES (ENGINE LDS-465-2)
a.
Cleaning.
FRAME
1
1.
T a k e two hose clamps (1) off hydraulic pump return tube (2). Take two hose
clamps (3) off hydraulic pump bypass hose (4).
2.
T a k e out two screws (5), two nuts (6), and two lockwashers (7). Take two
3 / 4 - i n c h loop clamps (8) off hydraulic pump return tube (2). Take two
1/2-inch loop clamps (9) off hydraulic pump bypass hose (4).
WARNING
E y e shields must be worn when using compressed air.
E y e injury can occur if eye shields are not used.
C l e a n hydraulic pump return tube (2), bypass hose (4), and supply hose (10)
3.
w i t h warm soapy water. B l o w dry with compressed sir.
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |