|
|
TM 9-2815-210-34-2-2
FRAME 20
NOTE
I n t a k e valve seat counterbores (1) are bigger than
exhaust valve seat counterbores (2).
I n machine shop, measure depth of three intake valve seat counterbores (1).
1.
D e p t h must be 0.4155 to 0.4205 inch.
I n machine shop, if depth of any intake valve seat counterbore (1) is not
2.
0 . 4 1 5 5 to 0.4205 inch, machine to correct depth.
I n machine shop, measure depth of three exhaust valve seat counterbores (2).
3.
D e p t h must be 0.3825 to 0.3875 inch.
I n machine shop, if depth of any exhaust valve seat counterbore (2) is not
4.
0 . 3 8 2 5 to 0.3875 inch, machine to correct depth.
S e n d cylinder head (3) back to mechanic.
5.
GO TO FRAME 21
4-231
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |