Engines LDS-465-1, LDS-465-1A, and LDS-465-2

TM 9-2815-210-34-2-2

( b ) Engines LDS-465-1, LDS-465-1A, and LDS-465-2

FRAME 1

CAUTION

B e careful not to damage screens (1) during cleaning

w i t h brass wire probe.

C l e a n four oil pump tubes (2) with a brass wire probe. Use a wire brush to

t a k e out carbon and sludge.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when solvent

i s used. Use only in well-ventilated places. Failure to

d o this may result in injury to personnel and damage to

equipment.

W a s h four oil pump tubes (2) by flushing with dry cleaning solvent.

WARNING

Eye shields must be worn when using compressed air.

E y e injury can occur if eye shields are not used.

D r y four oil pump tubes (2) by blowing them out with compressed sir.

Clean brace (3), flange (4), and four clamps (5) using dry cleaning solvent.

Use a stiff brush to take off sludge and gum deposits.

END OF TASK

4-157