|
|
TM 9-2815-210-34-2-2
FRAME 4
C h e c k that neither face of camshaft thrust plate (1) is worn thin in places.
1.
C h e c k that neither face of camshaft thrust plate has grooves worn in it.
2.
I f either face of camshaft thrust plate (1) is groooved or badly worn down,
throw it away and get a new one.
WARNING
Dry cleaning solvent is flammable. Do not use near
an open flame. K e e p a fire extinguisher nearby when
s o l v e n t i s u s e d . U s e only in well-ventilated places.
F a i l u r e to do this may result in injury to personnel
a n d damage to equipment.
C h e c k that neither face of camshaft thrust plate (1) has small nicks, scratches
3.
o r b u r r s . T o fix small nicks, scratches, and burrs, put crocus cloth soaked
i n d r y c l e a n i n g s o l v e n t o n a f l a t s u r f a c e . T h e n rub face of camshaft thrust
p l a t e against crocus cloth.
M e a s u r e thickness of camshaft thrust plate (1) near hole in center. Reading
4.
must be within limits given in table 4-20. I f readings are not within given
l i m i t s , throw away camshaft thrust plate and get a new one.
GO TO FRAME 5
Table 4-20. Camshaft Thrust Plate Wear Limits
Size and Fit
Wear Limit
of New Parts
Index
(inches)
(inches)
I t e m / P o i n t of Measurement
Number
0.2380
0 . 2 4 0 0 to 0.2420
C a m s h a f t thrust plate thickness
1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |