|
|
TM 9-2815-210-34-2-1
3-33. ROCKER ARMS, ROCKER ARM PUSH RODS, AND VALVE TAPPETS.
FRAME 1
1.
L o o s e n 12 adjusting screw locknuts (1) and turn 12 adjusting screws (2) to
t h e left to loosen tension on valve springs (3).
2.
T a k e out 12 screws and lockwashers (4).
T a k e out front and rear rocker arm assemblies (5) . Tag each rocker arm
3.
assembly so it can be put back in the same place.
NOTE
When pushrods (6) are taken out, valve tappets (7) may
come out with them. I f this happens, tag tappet so it
c a n be put back in the same bore it came out of. Number
v a l v e tappets, tappet bores, and push rods (6) by num-
bers one to 12 starting from front to rear of engine.
4.
T w i s t , lift out, and tag 12 push rods (6).
GO TO FRAME 2
TA 087681
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |