FRAME 3 - TM-9-2520-246-34-10381

TM 9-2520-246-34-1

FRAME 3

NOTE

Valve assembly (1) cannot be repaired. If valve assembly

does not pass the test given in the following steps, throw

valve assembly away and get a new one. If a new valve

assembly is used, do this frame again on new part.

Make sure that valve assembly (1) is clean.

Hold finger over port (2) and blow into port (3). If air goes through, valve is

damaged.

Hold finger over port (2) and blow into port (4). If air does not go through, valve

is damaged.

Check that spring (5) is not damaged.

Check that plunger (6) has no nicks, burrs or scratches. Small burrs, nicks or

scratches can be repaired.

END OF TASK

2-361