 |
|||
|
|
|||
|
Page Title:
Table 2-57. Rear Bearing Retainer Wear Limits |
|
||
| ||||||||||
|
|
 TM 9-2520-246-34-1
FRAME 10
NOTE
Readings must be within limits given in table 2-57.
The letter L indicates a loose fit and the letter T
indicates a tight fit. If readings are not within
given limits, throw away part and get a new one.
Measure outside diameter of oil seal (1).
1.
Measure rear bearing retainer bore (2).
2.
Measure dowel pin bore (3).
3.
Measure fit of oil seal (1) in rear bearing retainer bore (2).
4.
Measure fit of dowel pin (4) in dowel pin bore (3).
5.
END OF TASK
Rear Bearing Retainer Wear Limits
Table 2-57.
Size and Fit
Wear Limit
of New Parts
Item
(inches)
(inches)
Item/Point of Measurement
Number
None
3.3524 to 3.3563
Oil seal outside diameter
1
3.3495
3.3465 to 3.3485
Rear bearing retainer bore
2
0.7530
0.7510 to 0.7530
Dowel pin bore
3
0.0025T
0.0038T to 0.0098T
Fit of oil seal in retainer bore
1 and 2
0.0025L
0.0000T to 0.0020L
Fit of dowel pin in bore
3 and 4
2-218
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals