Table 2-36. Input Shaft Cover Wear Limits

TM 9-2520-246-34-1

FRAME 9

NOTE

Readings must be within limits given in table 2-36.

The letter T indicates a tight fit. If readings are

not within given limits, throw away part and get

a new one.

Measure fit of oil seal (1) in bore (2).

Measure fit of oil seal (3) in input shaft cover bore (4).

Measure fit of deflector (5) on flange (6).

GO TO FRAME 10

Table 2-36.

Input Shaft Cover Fits and Tolerances

Size and Fit

Wear Limit

of New Parts

(inches)

Item/Point of Measurement

Index Number

0.0065T

0.001T to 0.007T

Fit of oil seal in bore

l and 2

0.0020T

0.003T to 0.009T

Fit of oil seal in input shaft cover

3 and 4

bore

5 and 6

0.0009T

0.011T to 0.024T

Fit of deflector on flange

2-196