CAB TO CHASSIS GROUND STRAP REPLACEMENT

TM 9-2320-366-20-3

7-78. CAB TO CHASSIS GROUND STRAP REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Tools and Special Tools (Cont)

Batteries disconnected (para 7-57).

Socket Set, Socket Wrench, (Item 35, Appendix C)

Tools and Special Tools

Materials/Parts

Tool Kit, Genl Mech (Item 46, Appendix C)

Ties, Cable, Plastic (Item 69, Appendix D)

Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)

Nut, Self-Locking (Item 167, Appendix G)

Lockwasher (Item 75, Appendix G)

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Remove two screws (1) and washers (2) from front grille

(3).

(2) Remove screw (4) and washer (5) from front grille (3).

(3) Remove front grille (3) from cab (6).

(4) Loosen screw (7) in chassis (8) and remove cab to

chassis ground cable (9).

(5) Remove self-locking nut (10), washer (11), cab to

chassis ground cable (9), and lockwasher (12) from stud

(13). Discard self-locking nut and lockwasher.

Change 1

7-355