LEFT-HAND DOOR AND CAB MARKER LIGHTS CABLE ASSEMBLY REPLACEMENT

TM 9-2320-366-20-3

7-61. LEFT-HAND DOOR AND CAB MARKER LIGHTS CABLE ASSEMBLY

REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Ties, Cable, Plastic (Item 69, Appendix D)

PDP cover removed (para 16-2).

Lockwasher (4) (Item 82, Appendix G)

Lockwasher (2) (Item 88, Appendix G)

Gasket (2) (Item 24, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

a. Removal.

NOTE

Note routing of left-hand door and cab marker

lights cable assembly prior to removal.

Remove plastic cable ties as required.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

(4) Remove two nuts (5), lockwashers (6), washers (7), and

cover (8) from terminal board TB1 (9).

Discard

(5) Disconnect terminal lug TL75 (10) from terminal board

TB1 (9) position 2.

(6) Disconnect terminal lug TL87 (11) from terminal board

TB2 (12) position 6.

Change 1