 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Battery box cover removed (TM 9-2320-366-10-2).
(Item 20, Appendix D)
Grease, Automotive and Artillery (GAA)
(Item 22, Appendix D)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Lockwasher (Item 87, Appendix G)
Apron, Rubber (Item 3, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Puller, Battery Terminal (Item 28, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
WARNING
Remove rings, bracelets, watches, necklaces, and any other jewelry before working around
vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit
and cause severe burns or electrical shock. Batteries can explode from a spark. Battery acid
is harmful to skin and eyes. Always wear eye protection and rubber gloves when working
with batteries. Failure to comply may result in injury to personnel.
Negative battery terminals must be disconnected first.
Failure to comply may result in
serious injury or death to personnel.
a. Removal.
NOTE
Tag cables and connection points prior to
disconnecting.
(1) Remove nut (1) and lockwasher (2) from battery
ground cable (3). Discard lockwasher.
(2) Deleted.
(3) Remove terminal lugs TL50A (5), TL48 (6), and
battery tester terminal lug (7) from battery ground
cable (3).
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals