Installation. - TM-9-2320-366-20-31006

TM 9-2320-366-20-3

7-47. ETHER SENSOR REPLACEMENT (CONT)

(5) Disconnect connector clamp (4) from ether sensor

connector (5).

(6) Disconnect connector P42 (6) from ether sensor

connector (5).

(7) Remove ether sensor (7) from coolant bypass tube (8).

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(1) Apply antiseize compound to threads of ether sensor (1).

(2) Install ether sensor (1) in coolant bypass tube (2).

(3) Connect connector P42 (3) to ether sensor connector

(4).

(4) Connect connector clamp (5) on ether sensor connector

(4).

7-252