M1088/M1089 STATIONARY WORKLIGHT ASSEMBLY REPLACEMENT/REPAIR

TM 9-2320-366-20-3

7-42. M1088/M1089 STATIONARY WORKLIGHT ASSEMBLY REPLACEMENT/REPAIR

This task covers:

a. Removal

d. Installation

b. Disassembly

e. Follow-On Maintenance

c. Assembly

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Lockwasher (Item 96, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

a. Removal.

NOTE

Left side and right side stationary

worklight assemblies are removed the

same way. Right side shown.

(1) Disconnect worklight connector (1) from connector

P134A (2).

(2) Remove nut (3), lockwasher (4), washer (5) and

worklight assembly (6) from vehicle.

Discard

lockwasher.

b. Disassembly.

(1) Remove screw (1) and retaining ring (2) from worklight

assembly (3).

(2) Loosen two screws (4) on back of lamp (5).

(3) Disconnect two terminals (6) from lamp (5).