HEADLIGHT AND HOUSING REPLACEMENT/REPAIR/ADJUSTMENT

TM 9-2320-366-20-3

7-41. HEADLIGHT AND HOUSING REPLACEMENT/REPAIR/ADJUSTMENT

This task covers:

a. Removal

d. Installation

b. Disassembly

e. Adjustment

c. Assembly

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Dispenser, Pressure Sensitive Adhesive Tape

Cab raised (TM 9-2320-366-10-1).

Grommet, Nonmetallic (3) (Item 55, Appendix

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Lockwasher (3) (Item 85, Appendix G)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Headlight Adjustment Screen (Item E-6, Appendix E)

a. Removal.

NOTE

Both headlights are removed the same way.

Left headlight shown.

Perform steps (1) through (3) to remove lamp

only.

(1) Remove three screws (1) and retaining ring (2) from

housing (3).

(2) Remove lamp (4) from housing (3).

NOTE

Tag connectors and connection points prior to

disconnecting.

Connector numbers are the same on left and

right headlights.

(3) Disconnect connectors 18, 91, and 17 (5) from housing

(3).