M1089 WRECKER CONTROL PANEL TOGGLE SWITCH REPLACEMENT

TM 9-2320-366-20-3

7-34. M1089 WRECKER CONTROL PANEL TOGGLE SWITCH REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Material/Parts

Engine shut down (TM 9-2320-366-10-1).

Dispenser, Pressure Sensitive Adhesive Tape

Batteries disconnected (para 7-57).

Insulation Sleeving, Electrical (Item 29, Appendix

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Lockwasher (8) (Item 100, Appendix G)

Tool Kit, Electrical (Item 45, Appendix C)

Lockwasher (Item 74, Appendix G)

Heater, Gun Type, Electric (Item 24, Appendix B)

Nut, Self-Locking (2) (Item 134, Appendix G)

Splice, Conductor (2) (Item 275, Appendix G)

Splice, Conductor (Item 276, Appendix G)

a. Removal.

NOTE

There are seven toggle switches on the

WRECKER CONTROL PANEL. Steps (1

and 2) apply to all seven toggle switches.

(1) Remove eight screws (1), lockwashers (2), and washers

(3) from control panel top cover (4).

Discard

(2) Remove two self-locking nuts (5), four washers (6), two

screws (7), and control panel top cover (4) from

WRECKER CONTROL PANEL (8). Discard self-locking

nuts.