|
|
TM 9-2320-366-20-3
(4) Position wires (6) on bottom of terminal blocks (1) as
recorded in removal.
(5) Tighten screws (7) on bottom of terminal blocks (1).
(6) Install channel (3) on winch assembly (8) with two
washers (9), screws (10), and self-locking nuts (11).
(7) Position five terminal block jumpers (12) on top of
terminal blocks (1) as recorded in removal.
NOTE
Install plastic cable ties as required.
(8) Position wires (13) on top of terminal blocks (1) as
recorded in removal.
(9) Tighten screws (14) on top of terminal blocks (1).
Change 1
7-200.1/(7-200.2 Blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |