M1089 TERMINAL BLOCK REPLACEMENT

TM 9-2320-366-20-3

7-33. M1089 TERMINAL BLOCK REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Material/Parts

Engine shut down (TM 9-2320-366-10-1).

Dispenser, Pressure Sensitive Adhesive Tape

Batteries disconnected (para 7-57).

Nut, Self-Locking (2) (Item 133, Appendix G)

Lockwasher (8) (Item 100, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Nut, Self-Locking (2) (Item 128, Appendix G)

a. Removal.

(1) Remove two self-locking nuts (1), four washers (2), and

two screws (3) from top cover (4). Discard self-locking

nuts.

(2) Remove eight screws (5), lockwashers (6), washers (7),

and top cover (4) from control panel (8). Discard

NOTE

Remove plastic cable ties as required.

Tag and record wires, terminal block jumpers

and connection points prior to disconnecting.

(3) Loosen screws (9) on top of terminal blocks (10).

(4) Remove wires (11) from top of terminal blocks (10).

(5) Remove five terminal block jumpers (12) from top of

terminal blocks (10).

Change 1