Disassembly. (cont) - TM-9-2320-366-20-30913

TM 9-2320-366-20-3

NOTE

Perform steps (4) through (6) on junction

boxes that have not had modification kit

installed.

(4) Unsolder five wires (5) from shutdown relay (6).

WARNING

Wear appropriate eye protection when

removing rivets. Failure to comply may

result in injury to personnel.

(5) Remove three rivets (7) and bracket (8) from junction

box (4).

(6) Remove three nuts (9), lockwashers (10), washers (11),

and shutdown relay (6) from bracket (8). Discard

NOTE

Perform steps (6.1) through (6.3) on junction

boxes that have modification kits installed.

(6.1) Disconnect shutdown relay connector (11.1) from

shutdown relay (11.2).

(6.2) Remove nut (11.3), lockwasher (11.4), washer (11.5),

shutdown relay (11.2) and screw (11.6) from bracket

(11.7). Discard lockwasher.

Change 1

7-166.1/(7-166.2 Blank)