STARTER PUSHBUTTON SWITCH REPLACEMENT

TM 9-2320-366-20-3

7-20. STARTER PUSHBUTTON SWITCH REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Instrument panel assembly removed for access (para 7-

Dispenser, Pressure Sensitive Adhesive Tape

15).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

a. Removal.

NOTE

Tag wires and connection points prior to

disconnecting.

(1) Disconnect terminal lugs TL162 (1) and TL163 (2) from

starter pushbutton switch (3).

(2) Remove nut (4), washer (5), and starter pushbutton

switch (3) from instrument panel assembly (6).

b. Installation.

(1) Position starter pushbutton switch (3) in instrument panel

assembly (6) with washer (5) and nut (4).

(2) Tighten nut (4) to 57-70 lb-in. (6-8 Nm).

(3) Connect terminal lugs TL163 (2) and TL162 (1) to starter

pushbutton switch (3).

c. Follow-On Maintenance.

(1) Install instrument panel assembly (para 7-15).

(2) Start engine (TM 9-2320-366-10-1).

(3) Shut down engine (TM 9-2320-366-10-1).

End of Task.

7-121