Disassembly. (cont) - TM-9-2320-366-20-30816

TM 9-2320-366-20-3

7-11. WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)

(4) Remove screw (11), lockwasher (12), and wire 1603 (4)

from PDP frame (10). Discard lockwasher.

(5) Remove two nuts (13), lockwashers (14), washers (15),

cover (16), and two washers (15) from terminal board

TB1 (17). Discard lockwashers.

(6) Remove 38 quick disconnect terminals (18) from terminal

board TB1 (17) positions 5, 11, 20, 23, 24, 26, 27, 28,

29, 30, 31, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 46,

47, 50, 51, 52, 53, 54, 56, 57, 58, 59, 60, 61, 62, 63,

and 64.

(7) Remove two nuts (19), lockwashers (20), washers (21),

spacers (22), terminal board TB1 (17), two spacers (23),

and screws (24) from PDP frame (10).

Discard

lockwashers.

(8) Remove six quick disconnect terminals (25) from

connector PX21 (26).

(9) Push in two locking tabs (27) and remove connector

PX21 (26) from front of PDP frame (10).