WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR

TM 9-2320-366-20-3

7-11. WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR

This task covers:

a. Removal

d. Installation

b. Disassembly

e. Follow-On Maintenance

c. Assembly

INITIAL SETUP

Equipment Conditions

Materials/Parts

Windshield wiper motor removed (para 18-4).

Dispenser, Pressure Sensitive Adhesive Tape

Personnel heater removed (para 18-9).

Instrument panel assembly removed (para 7-15).

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (4) (Item 71, Appendix G)

Lockwasher (6) (Item 93, Appendix G)

Tools and Special Tools

Tool Kit, Auto Fuel (Item 43, Appendix C)

Lockwasher (2) (Item 84, Appendix G)

Tool Kit, Genl Mech (Item 46, Appendix C)

Lockwasher (11) (Item 83, Appendix G)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Lockwasher (4) (Item 88, Appendix G)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Personnel Required

(2)

a. Removal.

NOTE

Remove plastic cable ties as required.

Tag wires and connection points prior to

disconnecting.

(1) Disconnect steering column switch connector J19 (1)

from connector P19 (2).

(2) Disconnect steering column switch connector P18 (3)

from connector J18 (4).