Installation. (cont) - TM-9-2320-366-20-30768

TM 9-2320-366-20-3

7-7. STARTING MOTOR REPLACEMENT (CONT)

(27) Remove nut (25) from solenoid terminal (26).

(28) Position terminal lug TL26 (27) on solenoid terminal (26)

with nut (25).

(29) Tighten nut (25) to 31 lb-in. (4 Nm).

(30) Remove nut (28) from solenoid terminal (29).

(31) Position terminal lugs TL12 (30) and TL55 (31) on

solenoid terminal (29) with nut (28).

(32) Tighten nut (28) to 30 lb-ft (41 Nm).

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(33) Apply adhesive on terminal lug TL26 (27), solenoid

terminal (26), and nut (25).

(34) Apply adhesive on terminal lugs TL12 (30), TL55 (31),

solenoid terminal (29), and nut (28).

7-32

Change 1