STARTING MOTOR REPLACEMENT

TM 9-2320-366-20-3

7-7. STARTING MOTOR REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Cab raised (TM 9-2320-366-10-1).

Dispenser, Pressure Sensitive Adhesive Tape

Batteries disconnected (para 7-57).

(Item 20, Appendix D)

Adhesive (Item 8, Appendix D)

Adhesive (Item 9, Appendix D)

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Bolt, Machine (3) (Item 2, Appendix G)

Tool Kit, Genl Mech (Item 46, Appendix C)

Gasket (Item 39, Appendix G)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Splice, Conductor (Item 261, Appendix G)

Sling, Endless (Item 32, Appendix C)

Tape, Insulation, Electrical (Item 68, Appendix

Wrench Set, Socket (Item 51, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Insulation, Sleeving, Electrical (Item 28.1,

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Appendix D)

Adapter, Socket Wrench (Item 2, Appendix B)

Heater, Gun Type, Electric (Item 24, Appendix B)

Personnel Required

Crowfoot Attachment, Socket Wrench (Item 8, Appendix

(2)

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris. Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Tag wires and connection points prior to

disconnecting.

(1) Remove adhesive, nut (1), terminal lugs TL55 (2) and

TL12 (3) from solenoid terminal (4).

(2) Position nut (1) on solenoid terminal (4).

(3) Remove adhesive, nut (5), and terminal lug TL26 (6)

from solenoid terminal (7).

(4) Position nut (5) on solenoid terminal (7).

Change 1

7-27