Belt Take-Up Bracket Removal.

TM 9-2320-366-20-3

c. Belt Take-Up Bracket Removal.

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris. Failure to

comply may result in injury to personnel.

(1) Loosen two screws (1) on water pump pulley bracket (2).

(2) Position water pump pulley bracket (2) for access to

three screws (3).

(3) Remove screw (4) and washer (5) from alternator belt

take-up plate (6).

(4) Remove screw (7), washer (8), and alternator belt take-

up plate (6) from alternator belt take-up mounting bracket

(9).

(5) Remove three screws (3) from alternator belt take-up

mounting bracket (9).

(6) Remove two screws (10) and alternator belt take-up

mounting bracket (9) from engine front cover (11).

7-17