Support Brackets Installation. (cont)

TM 9-2320-366-20-3

7-4. ALTERNATOR BRACKETS REPLACEMENT (CONT)

WARNING

Adhesive Sealant MIL-S-46163 can

damage your eyes.

Wear safety

goggles/glasses when using; avoid

contact with eyes. If sealant contacts

eyes, flush eyes with water and get

immediate medical attention. Failure to

comply may result in injury to personnel.

(3) Apply sealing compound to threads of three screws (4)

and stud (5).

(4) Position alternator bracket (6) on thermostat housing (7)

with three screws (4).

(5) Install self-locking nut (8) on stud (5).

(6) Tighten three screws (4) to 18-22 lb-ft (24-30 Nm).

(7) Position two washers (9) and screws (10) in alternator bracket (6).

(8) Tighten two screws (10) to 121-147 lb-ft (164-200 Nm).

(9) Position belt adjusting arm (11) on alternator bracket (6)

with two washers (12) and screws (13).

(10) Tighten two screws (13) to 18-22 lb-ft (24-30 Nm).

7-16