Follow-On Maintenance. - TM-9-2320-366-20-30746

TM 9-2320-366-20-3

7-2. 100 AMP ALTERNATOR REPLACEMENT (CONT)

(24) Remove self-locking nut (32), washer (33), and two

washers (34) from alternator (3).

(25) Position two washers (34), terminal lug TL60 (35),

washer (33), and self-locking nut (32) on alternator (3).

(26) Tighten self-locking nut (32) to 80 lb-in. (9 N m).

(27) Position dust boot (36) on terminal lug TL60 (35).

(28) Remove screw (37), lockwasher (38), and washer (39)

(29) Position ground strap (40), washer (39), and terminal lug

TL5 (41) on alternator (3) with lockwasher (38) and

screw (37).

(30) Tighten screw (37) to 80 lb-in. (9 N m).

c. Follow-On Maintenance.

(1) Install alternator belts (para 7-3).

(2) Connect batteries (para 7-57).

(3) Start engine (TM 9-2320-366-10-1).

(4) Check alternator operation (TM 9-2320-366-10-1).

(5) Shut down engine (TM 9-2320-366-10-1).

End of Task.

7-10

Change 1