Installation. (cont) - TM-9-2320-366-20-30709

TM 9-2320-366-20-3

(7) Position upper coolant tube (8) between coolant hose (7)

and thermostat housing (10).

(8) Slide coolant hose (6) onto thermostat housing (10).

(9) Engage as many clamp tabs (4) as possible in tab

windows (5) allowing little or no play between four

clamps and two coolant hoses (6 and 7).

(10) Tighten four clamps (2) to 12-18 lb-in. (1-2 Nm).

NOTE

Minimum allowable gap on clamp is 0.2 in. (5

mm). If gap is less than 0.2 in. (5 mm),

remove and re-install clamp.

(11) Measure gap on four clamps (2).

Change 1

6-53