Installation. (cont) - TM-9-2320-366-20-30695

TM 9-2320-366-20-3

(10) Position coolant hose (10) on coolant bypass tube (2).

(11) Position flow restrictor (12) and coolant hose (10) on

transmission oil cooler (13).

(12) Engage as many clamp tabs (7) as possible in tab

windows (8) allowing little or no play between two

clamps (5) and coolant hose (10).

(13) Tighten two clamps (5) to 12-18 lb-in. (1-2 Nm).

(14) Tighten two clamps (4) to 12-18 lb-in. (1-2 Nm).

NOTE

Minimum allowable gap on clamp is 0.2 in. (5

mm). If gap is less than 0.2 in. (5 mm),

remove and re-install clamp.

(15) Measure gap on two clamps (5).

Change 1

6-39