Installation. - TM-9-2320-366-20-30682

TM 9-2320-366-20-3

6-5. THERMOSTAT REPLACEMENT (CONT)

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(1) Apply adhesive to thermostat housing surface (1).

(2) Position thermostat gasket (2) on thermostat housing (1).

(3) Install thermostat (3) with long end up.

(4) Apply adhesive to outlet housing (4) mating surface.

(5) Install outlet housing (4) on thermostat housing (1) with

two washers (5) and screws (6).

c. Follow-On Maintenance.

(1) Lower cab (TM 9-2320-366-10-1).

(2) Add coolant to radiator overflow tank (TM 9-2320-366-

10-2).

(3) Check for coolant leaks under vehicle.

(4) Start engine (TM 9-2320-366-10-1).

(5) Check coolant level after normal operating temperature

is reached. Add coolant as required (TM 9-2320-366-10-

2).

(6) Raise cab (TM 9-2320-366-10-1).

6-26