Installation. (cont) - TM-9-2320-366-20-30659

TM 9-2320-366-20-3

CAUTION

Ensure engine fan is positioned with mark

facing forward. Failure to comply may result

in damage to equipment.

NOTE

Perform steps (7.1) through (7.3) on vehicles

serial number 8427 and higher and on

vehicles that have had the fan clutch

replaced.

(7.1) Position engine fan (8.1) on fan clutch assembly (8.2)

with six washers (8.3), lockwashers (8.4) and nuts (8.5).

(7.2) Tighten six nuts (8.5) to 15 lb-ft (20 Nm) in sequence

shown.

(7.3) Re-tighten six nuts (8.5) to 23-29 lb-ft (31-39 Nm) in

sequence shown.

NOTE

Perform steps (8) through (12) on vehicles

serial number 8426 and lower that have not

had fan clutch replaced.

(8) Install grommet (9) on engine fan (10).

(9) Install fan support plate (11) on engine fan (10).

(10) Position engine fan (10) and fan support plate (11) on

fan clutch assembly (12) with six washers (13),

lockwashers (14), and screws (15).

(11) Tighten six screws (15) to 15 lb-ft (20 Nm) in sequence

shown.

(12) Re-tighten six screws (15) to 22-32 lb-ft (30-44 Nm) in

sequence shown.

Change 1

6-5