EXHAUST PIPE REPLACEMENT

TM 9-2320-366-20-3

5-3. EXHAUST PIPE REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut down (TM 9-2320-366-10-1).

Nut, Self-Locking (4) (Item 156, Appendix G)

Cab raised (TM 9-2320-366-10-1).

Nut, Self-Locking (3) (Item 129, Appendix G)

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 36, Appendix C)

WARNING

Ensure exhaust system is cool before

performing maintenance.

Failure to

comply may result in injury to personnel.

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris. Failure to

comply may result in injury to personnel.

Do not operate vehicle with exhaust pipe

removed. Toxic exhaust fumes may enter

cab, resulting in serious injury or death to

personnel.

a. Removal.

(1) Remove self-locking nut (1) from clamp (2). Discard self-

locking nut.

(2) Disconnect exhaust pipe (3) from muffler (4).

(3) Remove clamp (2) from exhaust pipe (3).

5-8

Change 1