Follow-On Maintenance. - TM-9-2320-366-20-30631

TM 9-2320-366-20-3

(3) Apply grease to bushing (8) and lever stud (9).

WARNING

Retaining rings are under tension and can

act as projectiles when released causing

severe eye injury.

Use care when

removing retaining rings.

Failure to

comply may result in injury to personnel.

(4) Install bushing (8) and lever (2) on lever stud (9) with

retaining ring (10).

(5) Apply grease to ball stud (1).

(6) Install ball seat (11) with threaded rod (12) on ball stud

(1).

(7) Install clip ring (13) on ball seat (11).

c. Follow-On Maintenance.

(1) Install instrument panel assembly (para 7-15).

(2) Start engine (TM 9-2320-366-10-1).

(3) Position windshield wiper control to off (TM 9-2320-366-

10-1).

(4) Depress accelerator pedal and check for smooth

operation.

(5) Check high/low HAND THROTTLE lever positions (para

4-22).

(6) Shut down engine (TM 9-2320-366-10-1).

End of Task.

4-101