THROTTLE CONTROL CABLE REPLACEMENT/ADJUSTMENT

TM 9-2320-366-20-3

4-18. THROTTLE CONTROL CABLE REPLACEMENT/ADJUSTMENT

This task covers:

a. Removal

c. Adjustment

b. Installation

d. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut down (TM 9-2320-366-10-1).

Grease, Molybdenum Disulfide (Item 24, Appendix D)

Steering wheel removed (para 13-2).

Personnel Required

(2)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

a. Removal.

(1) Position master power switch to on (TM 9-2320-366-10-

1).

(2) Place wiper blades in the full left position (TM 9-2320-

366-10-1).

(3) Position master power switch to off (TM 9-2320-366-10-

1).

(4) Disconnect batteries (para 7-57).

(5) Remove instrument panel assembly for access (para 7-

15).

WARNING

Retaining rings are under tension and can

act as projectiles when released causing

severe eye injury.

Use care when

removing retaining rings.

Failure to

comply may result in injury to personnel.

(6) Remove retaining ring (1) and bellcrank (2) from stud (3).

4-89