FUEL/WATER SEPARATOR AND FILTER REPLACEMENT

TM 9-2320-366-20-3

4-13. FUEL/WATER SEPARATOR AND FILTER REPLACEMENT

This task covers:

a. Filter Removal

d. Pump Head Installation

b. Filter Installation

e. Follow-On Maintenance

c. Pump Head Removal

INITIAL SETUP

Equipment Conditions

Materials/Parts

Cab raised (TM 9-2320-366-10-1).

Cloth, Cleaning (Item 16, Appendix D)

Batteries disconnected (para 7-57).

Oil, Fuel, Diesel (Item 36 or 37, Appendix D)

Filter Element, Fluid (Item 17, Appendix G)

Packing, Preformed (2) (Item 200, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Pan, Drain (Item 24, Appendix C)

WARNING

Diesel fuel is flammable. If fuel is spilled,

clean it up immediately. Failure to comply

may result in serious injury or death to

personnel.

a. Filter Removal.

(1) Disconnect connector clamp

(1)

from

fuel/water

separator connector (2).

(2) Disconnect connector P33 (3) from fuel/water separator

connector (2).

(3) Position drain pan under hose (4).

(4) Open drain valve (5) and allow fuel to drain.

(5) Loosen clamp (6) on hose (4).

(6) Remove hose (4) from drain valve (5).

4-72