 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
4-6. FUEL RATIO CONTROL TUBE REPLACEMENT (CONT)
(6) Remove fuel ratio control tube (5) from adapter (10).
(7) Remove preformed packing (11) from adapter (10).
Discard preformed packing.
(8) Remove adapter (10) from fuel governor (12).
(9) Remove preformed packing (13) from adapter (10).
Discard preformed packing.
b. Installation.
(1) Install preformed packing (1) on adapter (2).
(2) Install adapter (2) in fuel governor (3).
(3) Install preformed packing (4) in adapter (2).
(4) Connect fuel ratio control tube (5) to adapter (2).
(5) Install preformed packing (6) on adapter (7).
(6) Install adapter (7) in inlet manifold (8).
(7) Install preformed packing (9) on adapter (7).
(8) Install fuel ratio control tube (5) on adapter (7).
(9) Position loop clamp (10), washer (11), and screw (12) in
pressure regulating orifice (13).
(10) Tighten screw (12) to 15-25 lb-ft (20-34 Nm).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals