Installation. (cont) - TM-9-2320-366-20-30565

TM 9-2320-366-20-3

NOTE

Inner and outer charge air cooler to air inlet

elbow tubes are installed the same way.

Outer charge air cooler to air inlet elbow tube

shown.

(9) Position hose (19) on charge air cooler (20) with three

clamps (21).

(10) Position charge air cooler to air inlet elbow tube (2) in

hose (19).

CAUTION

Clamps at charge air cooler end of charge air

cooler to air inlet elbow tube must be

oriented with screw vertical.

Failure to

comply will cause interference with bottom of

cab.

(11) Tighten three clamps (21) to 90-100 lb-in. (7-8 Nm).

CAUTION

All clamps on engine air intake path must be

positioned and tightened correctly. Failure to

comply may allow foreign matter into engine air

intake and result in engine failure.

(12) Position hose (1) on air inlet elbow (5) with clamp (22).

(13) Tighten clamps (3 and 22) to 90-100 lb-in. (7-18 Nm).

4-35